Accutron ANA-DIGI Guia De Inicio Rapido

Technical Letter
THE FOLLOWING DIAGRAM SHOWS THE LOCATION OF THE SETTING
CROWN AND THE TWO SETTING BUTTONS. THE POSITIONS OF THE
VARIOUS DIGITAL DISPLAYS FOR EACH MODE (FUNCTION) ARE ALSO
SHOWN. USE THIS DIAGRAM FOR REFERENCE WITH THESE
OPERATING INSTRUCTIONS, AND WHEN SETTING THE WATCH,
UNTIL YOU BECOME FAMILIAR WITH THE OPERATION OF THIS
TIMEPIECE.
Your new watch features a combination of a three hand analog display for
the time, together with a full dial, digital display having numerous display
options and functions. Items #1 to 9 are listed in sequence as they are
accessed on the watch:
1. Analog three hand display only.
2. Analog hands and digital date display.
3. "T1" - display of digital time (12 or 24 hour base) and date.
4. "T2" - display of a second (time zone) digital time and date.
5. Display of month/date/year (or; date/month/year) up to year 2099,
including day of the week (four language options) plus week number of
the year.
6. "AL" - daily alarm function with date.
7. "AG" - Calendar alarm (for future date) function.
8. "CHR" - chronograph function, up to 99 days, with "add" and "split"
options.
9. "TM" - countdown timer function (up to 99 days).
10. Dial "backlight" function (6 seconds).
11. "EOL" - End Of Life function or weak battery indicator.
12. Battery saver function for watch storage, with automatic "catch-up" on
restart.
13. Digital "arrow" indicators, next to the crown and buttons, to assist in
setting procedures.
14. Electronic Setting for all functions.
SECTION I - PRELIMINARY NOTES
A. MODE SELECTION
The mode (function) is selected by turning the crown (in position "1", see
diagram), using a somewhat rapid motion. Do not turn too slowly or the
mode displayed will not change. Each display change takes about a half
turn (180 degrees) of the crown. The "mode code", when present, will show
in the upper left digital window. The display will advance in the following
sequence, forward or backwards, depending on the direction in which the
crown is turned:
MODE FUNCTION
1. Hands only, with or without date
2. Normal Time, or; Secondary (zone) time
3. Full Date with day, or; with day and week #
4. Daily Alarm, or; Calendar Alarm
5. Chronograph
6. Countdown Timer
BOOK NO. 575
B. ACCESSING THE ALTERNATE MODE DISPLAYS
Some of the preceding numbered mode functions have an alternate display.
#1. In the Hands only mode - button "A" turns date display at 3 o'clock on or off.
#2. In Normal time/Secondary time mode - button "B" alternates the "T1"
#3. In Full Date mode - button "A" turns the week number display on or off.
#4. In Alarm mode - button "B" alternates the Daily Alarm (AL) and
SECTION II - SETTING THE VARIOUS TIME FUNCTIONS
A. TIME SYNCHRONIZATION
For correct operation of the watch, the normal time (T1) shown by the
analog hands and the digital time MUST BE THE SAME. If they are not,
follow the below procedure to correct the hands to show the same as the
digital time.
Note: The correct time is not important in this step. If it is incorrect - ignore
it. The purpose is to synchronize the two times shown. The correct time will
be set into the watch in a later step.
1. By turning the crown, go to the digital display which shows either a
2. Pull the crown out to position "2". The letter "R" ( for reset) will appear
3. The time will show in the bottom digital window with the hours flashing
4. Turn the crown (still out) - the hands will move one hour for each
5. Push button "B" once - digital minutes will flash to indicate minutes
6. Push button "B" again - digital seconds will flash at "00". Second hand
7. Push the crown in to position "1". The watch will automatically go to
B. SETTING THE NORMAL (LOCAL) TIME (T1)
1. Turn crown (in position "1") until "T1" or "T2" appear in the upper left. If
2. Pull crown out to position "2". The digital hours will flash.
3. At this time you have the option of choosing a 12 hour AM/PM time
4. Now, set the hours. Both the digital hours AND the hands will change
5. To set the minutes, push button "B". The digital minutes will flash. Set
6. For seconds setting, push button "B" once more. Adjust the seconds
7. When the time source you are using to set the watch reaches "00"
MODE CODE
Blank
"T 1" or "T 2" C. SETTING THE FULL DATE
Day of the week
1. Turn the crown (in position "1" ) until the day of the week shows at the
"AL", or; "AG"
"CHR"
"TM"
Watch Setting Guide
and "T2" displays.
Calendar alarm (AG) displays.
blank dial, or; the date only, at the right.
at the top of the dial.
to indicate "hours" adjustment.
correction. Correction can be done in either direction, clockwise or
counter-clockwise, depending on crown direction. Continue until the
hour hand is in synch with the digital hour.
adjustment. Use the crown as above ( either direction) to adjust the
minute hand to the digital minutes shown.
is adjusted CLOCKWISE ONLY, by turning the crown in a clockwise
direction (away from you). Synchronize it to 12 o'clock position to match
the digital indication of "00".
Normal (T 1) or secondary (T 2) Time Mode. If "T 2" is shows at upper
left, push button "B" once to change to "T 1". The digital time at the
bottom and the time shown by the hands should now be synchronized.
it is "T2" that shows, then push button "B" one time to change the
display to "T1".
display for the digital time (with "AM" or "PM" showing at the upper
right), or; a 24 hour, military time display (no display on the upper right).
To change this display, push the "A" button once. Your choice of
AM/PM, or 24 hour time format will be reflected in all other watch
modes - Alarm, Secondary time, calendar alarm etc.
together, one hour at a time, forward or backwards, depending on the
direction that the crown is turned. Both the digital and hand time
displays should be the same if the Time Synchronization above was
done correctly.
the correct minutes by turning the crown in either direction.
forwards only by turning the crown away from you. Set the seconds to
"00".
seconds, push the crown in to start the time running.
upper left, and the complete date is displayed at the bottom as:
"xx.xx.xx" (shown with a "period" between the numbers as opposed to
the time display (xx:xx:xx) when a "colon" is used between the
numbers). The week number (1 through 52) may also be shown at the
upper right.
ANA-DIGI MULTIFUNCTION
Page 1
9/2006