Elvox 6921 Instrucciones Instalador página 3

Description
Art. 692I is an interface for connecting a Personal Com-
puter to Due Fili Plus systems by means of 13F.. series
panels and video camera art. 692U. The interface, via a
PC and the software SaveProg, is used to configure and
monitor the elements of the system. The interface allows
also, in the devices with bootloader on board, the updating
of the FW (Firmware).
The interface is supplied with 3 cables:
- DB9M-F cable to connect up with the PC.
- Six-way cable to connect the interface with the panels,
69AV/M, switchboard 945F.
- Four-way cable to connect the interface with the video
camera art. 692U, monitor, interphones, separators.
Installation
To install the software (SaveProg), follow the instructions,
in HTML format.
Download the "SaveProg" for PC software from the
website http://www.elvox.com in the Software section
-> Product Software.
After installing the SW run it in order to check for any up-
dates.
In both cases an Internet connection is required.
Main screen of the SaveProg software.
EN
The instruction manual is downloadable from the site www.
vimar.com
INSTALLATION RULES.
Installation should be carried out observing current installation
regulations for electrical systems in the Country where the
products are installed.
CONFORMITY.
EMC directive
Standards EN 60065, EN 61000-6-1 and EN 61000-6-3.
INFORMATION FOR USERS UNDER DIRECTIVE
2012/19/UE (WEEE)
In order to avoid damage to the environment and hu-
man health as well as any administrative sanctions, any
appliance marked with this symbol must be disposed of sepa-
rately from municipal waste, that is it must be reconsigned to
the dealer upon purchase of a new one. Appliances marked
with the crossed out wheelie bin symbol must be collected in
accordance with the instructions issued by the local authori-
ties responsible for waste disposal.
3