Use only AC adapters intended for this device. Do not use voltages
other than those indicated on the device. This equipment can be
used by children at least 8 years of age and people with reduced
physical, mental capabilities, and those who lack of experience and
knowledge, if supervision or instruction concerning the use of
equipment in a safe manner will be ensured, so that the associated
threats were understandable. Children should not play with the
equipment. Children should not be allowed to perform the cleaning
and maintenance of equipment.
PACKAGE CONTAINS
Semilac Electric nail drill (x1)
Semilac Electric nail drill power supply unit (x1)
Handpiece with brushless motor (x1)
Handpiece holder (x1)
Set of bits (x1)
Foot pedal (x1)
Instruction manual (x1)
PARTS DESCRIPTIONS
1. Speed control knob
2. Handpiece
3. Rotation direction change touch panel
4. On/Off button
5. Power supply socket
6. Foot pedal
7. Handpiece socket
8. Foot pedal socket
9. Power supply unit
GENERAL INSTRUCTION
• Before use, make sure the device is turned off.
• Set the speed control knob to "OFF".
• Fit the selected bit in the handpiece. Mind that it is properly set in its slot. Connect the handpiece to the power supply unit.
• If you want to pedal-control your device, connect the foot pedal to the device.
• Connect the power supply cable to a power source.
• Press the "ON" button – when the button lights up, the device is ready.
• The device will start running once the "OFF" range on the knob is exceeded.
• To control the speed with the foot pedal, gradually increase the pressure of your foot on the pedal.
SPECIFICATIONS
Size: 129,31x125,5x(H)127,27 mm
N.W.: 0,545 kgs
Rotational speed: 3000-35000 RPM
Adapter Input: 110-240 VAC
Adapter Output: 24 VDC / 2 A
Power: 48 W (max)
CHARACTERISTICS
• An easy bit fitting system.
• Efficient and silent operation with no vibrations.
• Speed is regulated with the knob or the foot pedal.
• Touch panel enables quick and smooth change of the direction of rotation.
4 EN