Power Supply - Genie 6031 H Manual Del Usuario

UK
HOW TO USE

1) Power supply:

Please open the battery compartment on the bottom of the unit. Place 6 pieces 1.5V Mignon batteries (AA). Watch out when
inserting the batteries to the correct polarity in the battery compartment.
2) Use adapter:
Plug the adapter rated 9VDC and 1,0 A for the output into the socket. The following power supplies can be used: Input:
230V-50Hz, Output: 9V, 1000mA Plug the power supply connector in the connector provided on the rear of the unit. Then
plug it into the socket
3) How to select:
By pressing the selection keys, you can simply switch between the two functions punching and stapling.
Stapling:
Press the button with the image of staples firmly. The small window below this button is green.
Punching:
Press the button with the figure "Punching" through. If here the green the punch function is activated
4) To install staple:
Press the opening button for the clamp magazine (PUSH) on the back of the unit. The staple magazine opens on the front.
Insert the staples with the open side down and close the magazine. This must be locked firmly and a click must be heard.
Please use only staples of size 24/6 or 26/6.
5) How to staple:
The "Staple" function key must be green. Now place the papers to be stapled in the opening on the front of the machine. As
soon as the contact is touched in the middle of the inlet opening, the imported papers are joined together at this point.
6) How to punch:
The "Punch" function key must be green. Set the guide rail on the side of the unit to the desired position size. Insert the
paper into the opening until it stops. The paper is punched automatically.
7) How to deal with jamming
If paper jams occur during use or the batteries become too weak, the paper will be automatically released. The machine has
an automatic paper release when jammed
8) How to clean
Detach the waste paper cover and get rid of the waste paper periodically
HINTS

Punch or staple only paper. This device is not suitable for editing other materials.

Weaker batteries affect the tacking and perforation performance. Do not open or repair the unit yourself, but bring
the unit to your dealer in case of damage or contact our customer hotline.

Clean the unit with a slightly damp, soft cloth without any sharp detergents.
SPECIFICATIONS
Model:
Net weight:
Overall:
Punch capacity:
Staple Type:
Staple capacity (Adaptor):
Staple capacity (Battery):
Power:
While loading staples, please make sure the magazine is not bounding. Do not staple or punch any material other than
papers. Battery voltage drop will degrade the stapler or punch performance
RS-6031
0. 64kg
170X117X113mm
15 sheets of 80gsm paper
26/6 or 24/6
For staple 26/6: 22 sheets of 80gsm Paper.
For staple 24/6: 18 sheets of 80gsm Paper.
For staple 26/6: 20 sheets of 80gsm Paper.
For staple 24/6: 16 sheets of 80gsm Paper.
9VDC / 1.2A, or 6 "AA" alkaline batteries.
~ 5 ~