Procedimiento De Instalación - Toto WASHLET 550H Manual De Instalación

1) Secure A-2 with A-1 at
marked location.
2) Apply seal tape to threads
of A-2 and connect A-3
with A-2.
3) Place A-4 into A-3 and
then connect A-5 and
A-3.
Do NOT cut zip tie
on A-5.
WARNING
4) Use A-6 to connect A-8
to A-4.
Make sure gasket is in place.
If gasket is not in place,
it will result in leakage.
WARNING
Gasket
A-8
ProcedimienTo de insTALAción
A-1
A-2
A-3
Seal tape
A-2
A-4
A-3
Do not cut
A-5
A-3
A-8
A-5
A-6
A-4
5) Attach A-7 to A-6.
Ensure the A-7 is correctly installed.
There should not be a gap.
Listen for an audible click.
WARNING
If the A-7 is not completely closed, it
will cause leakage.
Click!
6) Follow instructions for Type 1
for wall water supply and Type
2 for floor water supply.
Make sure there are no kinks in A-8.
Minimum radius is 50mm. Kinks will
cause product malfunction.
WARNING
50 mm radius minimum Make sure there are no kinks
Type 1:
1) Insert A-9 into A-12.
2) Connect A-8 with A-9.
Make sure gasket is in place.
If gasket is not in place,
it will result in leakage.
WARNING
Gasket
A-8
Type 2:
1) Insert A-10 into A-12.
2) Connect A-8 with A-10.
Make sure gasket is in place.
If gasket is not in place,
it will result in leakage.
WARNING
Gasket
A-8
A-7
A-6
Click!
Type 1
Type 2
A-12
A-9
A-8
A-8
A-10
A-12
A-5