The Models With Safety Tray; Resetting - Pressalit R8661 Instrucciones De Uso Y Mantenimiento

The models with safety tray

All lowstart changing tables, except
foldable models, are equipped with a
safety tray.
If the safety tray 1
contact with an object when the
table is being lowered, the motor
stops immediately and the table
will rise 3-4 cm to reduce the risk
of pinching/compression injuries
under the table. The table might
need resetting before it can be used
again. See „Resetting".

Resetting

Make sure that the safety tray is not
activated. Lower the changing table all
①
the way down to its starting position
using the down button.
Release the down button, and after 3-4
sec. press it in again until you hear a
②
slight click after approx. 10 sec.
Release the lowering button and then
raise the changing table to its highest
③
position. You will hear another click.
Lower the changing table a couple of
centimetres/about one inch.
④
Then raise it again to its highest
position. You will hear another click.
⑤
The changing table is now reset.
The changing table should also be reset if there has been an
interruption of the power supply.
comes into
1
en
17