Installation - Commercial Electric 53826101 Manual De Uso Y Cuidado

installation

warninG: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the fuse
or turn off the circuit breaker before removing an existing light fixture or installing the new one.
Item # 1000000000/Model # 53826101 can be installed into holes cut in the drywall that are between 3 1/4" and 3 1/2", 3 1/2" is suggested.
Item # 1000000000/Model # 53827101 can be installed into holes cut in the drywall that are between 4 1/4" and 4 3/4", 4 1/2" is suggested.
Item # 1000000000/Model # 53828101 can be installed into holes cut in the drywall that are between 6" and 6 3/4", 6" is suggested.
Item # 1000000000/Model # 53829101 can be installed into holes cut in the drywall that are between 8 1/4" and 8 7/8", 8 1/2" is suggested.
1
Preparing to mount the downlight
Make sure the power is turned off at the source to the location where
the LED downlight (A) will be installed.
If installing the LED downlight (A) in a preexisting hole:
□ Remove the existing can or fixture and set aside since it will not be needed.
□ Measure the ceiling hole to make sure it is the correct size for the fixture.
If installing the LED downlight (A) in a new ceiling location:
□ Place the hole template (C) over the desired location and trace the outline with a pencil.
□ Cut out the marked opening in the ceiling with a hole saw (not included).
note: 1/2" or 5/8" drywall recommended for easy installation.
2
Separate the fixture body and junction box
□ Twist the two parts of the connector in opposite directions to separate the fixture body and junction box.
4