Ecler EVO5 Guía Rápida página 11

MAC OSX v 10.X
The software will automatically detect and install the necessary drivers. The mixer will appear as input/output
device in the "System settings" in the chapter "sound".
If you wish to use the mixer as default soundcard on your computer, open the "Audio and MIDI settings" and set the
necessary parameters.
17. Configure the soundcard for your DJ software.
Each DJ application has a different method to configure the soundcard. Open your software and enter the audio
device management section. Your software will recognize the mixer's soundcard as "Ecler EVO ASIO Driver".
Assign the soundcard's 12 input and 12 output channels to the software channels you wish.
18. Play back a digital sound file.
Once your soundcard is correctly configured, play back a digital music file with your DJ software. Set the input
selector (3) on channel 1 to FireWire CH1-2 position. The channel's VU-meter will lighten up and you can adjust the
input signal with the GAIN and tone controllers as you did before with the analogue signal.
19. Select a MIDI control pattern.
The EVO5 offers 64 different MIDI control patterns and configurations for applications as LIVE 6 and TRAKTOR 3.
Press EFFECTS (33) and the encoder identified on screen as LOAD. A list with 64 available patterns will appear.
Select an "EMPTY" pattern and try using it.
20. Assign a command to a MIDI controller.
Each DJ application uses a different MIDI configuration procedure. Take your time to get through all the MIDI
control possibilities offered by your software and to find out how to programme them. Now select the function you
want to control and move the mixer's controller you want to execute this function when the MIDI device asks you to
do so. The device will identify the MIDI note sent by the mixer. From now on you will be able to remote control this
function. The controllers located around the display send MIDI data if this mode has been activated using the MIDI
button (32). The channel and output controllers instead, have to be configured to send MIDI data (a blue LED
indicates that the input channels are working in MIDI mode). Please consult the user manual if you wish to
configure the MIDI control, to program notes for each controller, to create labels or to save your presets.
11