Warn 75785 Instrucciones De Instalación página 5

4. Center the plow mount on the vehicle. Mark the plow
mount outline and slots onto the plastic skid plate with a
center punch or similar pointed object, figure 4.
5. Remove the twelve M6 bolts securing the stock plastic skid
plate and remove the skid plate, figure 5. Keep the M6
bolts for reassembly.
6. Place the plow mount back into position on the vehicle.
Slide the u-bolts (B1) down around the frame tubes and
through the slots in the mounting plate, figure 6. Check
the position of the u-bolt in the slot. Remove the plow
mount after the u-bolt orientation has been noted.
©2011 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
I N S T A L L A T I O N I N S T R U C T I O N S
Mark
Figure 4 - Mark Plow Mount Slots
Remove
Figure 5 - Remove Plastic Skid Plate
B1
Figure 6 - Check U-Bolt Position
5
Mark
Remove
76454 A1