Tools Required - Warn 75785 Instrucciones De Instalación

• Always take time to fully read and understand the installation and Operations Guide included with this product.
• Never operate this product if you are under 16 years of age.
• Never operate this product when under the influence of drugs, alcohol or medications.
• Always refer to the Installation and Specification Guide, supplied in the winch kit, for all wiring schematics and specific details on how to wire this WARN product to your vehicle.
• Never overtighten the j-bolt to the bracket. Doing so will pinch the winch cable against the bracket, damaging the cable.
• Always put the end of the actuator cable through the slot in the Termination Bracket. Terminating the cable through any other hole in the bracket will cause the bracket to not
function properly and will drastically reduce the life of the actuator cable.
Tools Required .......................................................................................................page 2
Torque Specifications ............................................................................................page 2
Parts List ................................................................................................................page 3
Installation ......................................................................................................... page 5-7
Maintenance/Care ................................................................................................page 8
- 10mm Socket
- 13mm Wrench
- 13mm Socket
- 9/16" Wrench
- 9/16" Socket
- Socket Wrench
- 3/8" to 1/2" Drill Bit
- Drill
- Round File
1/4 8 lb. ft. (10.8 N-m)
5/16 17 lb. ft. (12.5 N-m)
3/8 30 lb. ft. (40.7 N-m)
7/16 50 lb. ft. (67.8 N-m)
1/2 75 lb. ft. (101.7 N-m)
©2011 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
C A U T I O N
MOVING PARTS ENTANGLEMENT HAZARD
Failure to observe these instructions could lead to minor or moderate injury
Read installation and operating instructions thoroughly.
N O T I C E
EQUIPMENT DAMAGE
Read installation and operating instructions thoroughly.
T A B L E O F C O N T E N T S
T O O L S R E Q U I R E D
T O R Q U E S P E C I F I C A T I O N S
2
76454 A1