Preparing The Machine - Toro 136–5850 Instrucciones De Instalación

This product contains a chemical or chemicals known to the State of California to
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Wheel assembly
Wheel cover
Bolt (5/16 x 3/4 inch)

Preparing the Machine

1. Move the machine to a level surface.
2. Release the blade-control bar.
3. Disconnect the spark-plug wire from the spark plug.
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
CV
Rear Wheel Kit
21in Heavy-Duty Recycler
22290, 22291, 22293, 22295, 22296, 22297, and 22298
Model No. 136-5850
Proposition 65 Warning
cause cancer, birth defects, or reproductive harm.
Register at www.Toro.com.
® /Rear Bagger Lawn Mower, Models
WARNING
CALIFORNIA
Qty.
1
1 Install the rear wheel.
1
Form No. 3410-320 Rev A
Installation Instructions
Use
Figure 1
Original Instructions (EN) All Rights Reserved *3410-320* A
Printed in the USA
g189830