Operation; How To Care For Your Ice Crusher - Waring Commercial IC70E Manual De Instrucciones

OPERATION

1. Place the ice container (clear bowl) packed with the
unit under the bottom opening of the ice crusher. Plug
the unit in and set the On/Off ( , ) power switch to the
On ( ) position. NOTE: Ice crusher will not operate unless
ice container is secured into position.
2. To begin crushing ice, drop cubes into feeder chute
opening on top of unit. Blades of crusher unit are
self-feeding. DO NOT ATTEMPT TO PUSH CUBES
INTO BLADES WITH HAND OR ANY INSTRUMENT.
3. If a large cube should become lodged in the
crushing unit so that blades cannot reach it, set power
switch to the Off ( ) position and unplug unit from outlet.
Then pour warm water down through feeder chute until
lodged cube is melted or falls free. Plug unit back into
outlet, set the power switch to the On ( ) position, and
resume feeding cubes through the feeder chute.

HOW TO CARE FOR YOUR ICE CRUSHER

1. UNPLUG POWER CORD FROM OUTLET.
2. Pour hot water through top feeder chute to rinse out
after each use.
3. Wipe outside of ice crusher with a clean damp cloth.
4. NEVER IMMERSE UNIT IN WATER.
4