Tabla de contenido
Idiomas disponibles
Idiomas disponibles
- Press [+] until the message "Prog" appears and start the editing
mode. Now a time sequence can be chosen for each day of the
week starting with day 1 (bottom arrow
indicates day) and hour 00:00. The
bars around the display indicating the
24 hours are all black. Starting from
00:00, for each hour, mode must be
selected: press [+] for "Comfort", and [-
] for "Night". In "Comfort" mode the bar
corresponding to the hour remains
black, while in "Night" mode it becomes
blank. When pressing [+] or [-], the
hour switches automatically to the following one. Select desired
mode for all 24 hours. Press [Prog] to confirm the entered
configuration for day 1: the device will switch to the following day.
Repeat the same operation for all the days of the week. At the end
of the 7th day's configuration, pressing [Prog] the device will return
automatically to "Standby" mode.
WARNING: IN "NIGHT" MODE THE RADIATOR IS NOT
COMPLETELY
SWITCHED
OFF,
UNLESS
"NIGHT"
TEMPERATURE IS SET AT THE MINIMUM.
TO BE USED IN
"CHRONO" MODE, THE CONTROL MUST BE SWITCHED ON
AND "CHRONO" ICON MUST BE DISPLAYED.
IF ANY KEY IS NOT PRESSED WITHIN 10 SECONDS DURING
PROGRAM OPERATION, THE CONTROL WILL RETURN TO
STAND-BY MODE
) To use a preset mode (P1 P2 P3) or the programmable mode
c
(P4) activate the control and press the
until Chrono symbol appears
[Prog] key
in the display. At the top of the display
the program in use is shown (from P1
to P4). Programs are selected by
pressing the
key. In the
[Chrono]
external part of the display you can
22
Tabla de contenido
