Device carrying this symbol must never be disposed of with
household waste, but must be collected separately for recycling. At the
end of their life, these types of products must be collected and
recycled according to local regulations.
When a device is installed at high altitudes, the air output
temperature may increase.
1)Where to install.
- This device was designed to be installed in residential premises.
In any other case, please contact your supplier.
- Installation must comply with the standards currently enforced
in the country of use.
- Install the device within minimum distances from obstacles
Do not install the device in a draft likely to affect its control
conditioner, etc...).
Do no install under a fixed socket.
Do not install shelves above the device.
This device should be installed so that the lowest heated rail is at least 600
mm above the floor, i n order to prevent injuries to very small children.
2) How to connect
-
The device must be supplied with 230V, 50Hz.
-
The installation must comply with local national regulation.
-
If the power cable is damaged or too short, it must be replaced
by a qualified electrician;
INSTALLING THE DEVICE
Volume 1
Volume 2
16
No electrical device
Electrical
IPX4 (Standard EN
60335-2-43
: 2003/A2: 2008)
(i.e. air
device