Emergency Function & Auto-Restart Function; Emergency Button - Premier AA-4428 Manual De Instrucciones

EMERGENCY FUNCTION & AUTO-RESTART FUNCTION
AUTO-RESTART FUNCTION
The appliance is preset auto - restart function by
manufacturer.with this function the air conditioner
can keep the selected settings after a blackout or a
voltage drop.
To deactivate the AUTO-RESTART function ,pro-
ceed as follows:
1. Switch the air conditioner off and plug it off.
2. Press the emergency button meanwhile plug
it in.
3. Keep pressing the emergency button for more
than 10 seconds until you hear four short beeps
from the unit. The AUTO-RESTART function is
off.
To activate the AUTO - RESTART function ,
follow the same procedure until you hear three
short beeps from the unit.
EMERGENCY FUNCTION
If the remote control is lost, proceed as follows:
Lift the unit s front panel to reach the emergency
button of the air conditioner
1. if you press the button once ( one beep ), the air
conditioner will work in forced cooling function;
2. if you press the button twice ( two beeps ), the
unit will work in forced heating function.
3. To switch off the unit , you just need to press
the button again ( a single long beep) . After 30
minutes in forced function , the air conditioner
will automatically start working in FEEL mode .
The FEEL function is described in page 13.
The shape and position of the emergency button
may vary according to the model, but their
function is the same.
Remark: the external static pressure of heat pumps is 0 Pa for all models.
ON / OFF
Emergency
button
display PCB
5
Emergency
button
Emergency
button
front panel
ON/OFF
The emergency button in some
models could be on the right part
of the unit under the front panel.
P-7