Product Description; Installation - Klarstein 10029463 Manual Del Usuario

1 Handle
2 Shelf
3 Glass door
4 Foot
5 Lower door hinge
6 Fan mask
Before first use
• Remove the exterior and interior packing.
• Check to be sure the shelves are included.
• Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This
will reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded. To
level your appliance, adjust the front legs at the bottom of the appliance.
• Install away from direct sunlight and sources of heat (stove, heater, radiator, etc.) Direct sunlight may
affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold or hot
ambient temperatures may also cause the appliances not to perform properly.

Product Description

7 LED display
8 Temperature up button
9 Temperature down button
10 Light
11 Door frame
12 Hinge cover

Installation

10