Idiomas disponibles
Idiomas disponibles
Appendix C Bantam™ Self Retracting Lifelines
5. With fi rst SRL unit and webbing in
place, connect second SRL unit.
See fi gure 5.
6. Reposition
locating SRL units and webbing in
each respective slot. See fi gure 6.
7. ONLY use Werner Fall Protection
BANTAM™ 6' Self-Retracting Lifelines. NEVER use any other
fall protection device.
HORIZONTAL SYSTEMS:
Applications where the SRL is used horizontally or with a
horizontal system, the SRL and horizontal system components
must be compatible. Both the horizontal and vertical distances
are required for clearance calculations. Horizontal systems must
be designed and installed under the supervision of a qualifi ed
person.
R430006 (R430006-R)
Lifeline Material:
Dyneema / Polyester
Maximum
Arrest Distance:
24"
Average
Arrest Force:
900 lbs
.
400 lbs. capacity per OSHA 1910 and 1926
Complies with ANSI Z359.14-2012
(Class A, 130 - 310 lbs.)
the
plastic
Model number:
Date of Manufacture:
Anchor
Serial Number:
A
USER INSTRUCTIONS
keeper,
Only the harness back D-ring (A) to be used for fall arrest. Verify
connectors are compatible (see user manual). Ensure that the
anchorage strength is 5,000 lbs. (22kN) or more, or certified by a
Qualified Person to take twice the foreseeable load. To minimize
swing fall, anchor as directly above work area as possible.Check
for unobstructed clearance beneath. Do not permit the lifeline to
become slack. Verify that this product is suitable for the chosen
fall protection system before beginning work. See instructions for
suitability for horizontal use and horizontal lifeline compatibility. If
any of the white webbing is outside of the shrink tubing (clear
plastic) this indicates that the product has seen a fall and
should be removed from service. See the user manual for more
details. User must be trained before using this product.
Patent Pending
© 2016 Werner Co. P/N107122-02 Rev B 10/16
Page 3
