Young Living Home Diffuser Operación Manual página 7

Troubleshooting
When switched on, the diffuser does not operate.
Check that the adapter is securely plugged into the wall socket and the rear
of the diffuser. Check that the water level is not past the fill line. If there is too
much water adjust the water to the fill line and restart.
There is no mist or a lower amount of mist than usual.
Check the water level. If the water is above the fill line, carefully pour the
excess through the rear of the diffuser well, avoiding internal air inlets. Refill
the diffuser to the fill line and restart. Check for essential oil buildup on the
ultrasonic plate. If oil buildup is present, read cleaning instructions. The
ultrasonic plate must be free of residual oil buildup for the Home Diffuser
to operate properly.
Lights do not work.
Press the "On" button to verify that the lights are not functioning. If the lights
do not work, call Customer Care for further instructions.
Water is leaking from the top of the diffuser.
Make sure that the lid is properly covering the top opening of the diffuser. If it
is not, adjust the lid properly to ensure a secure fit to prevent the diffuser from
leaking.
Water is leaking from the bottom of the diffuser.
Water may have entered into the air inlets causing the water to exit through
the drain holes at the bottom of the diffuser. Water will not damage the
diffuser. Wipe off the diffuser and follow the pouring notice found under the
cleaning instructions.
7