Young Living Home Diffuser Operación Manual página 4

Operating instructions
1. Open the water reservoir by lifting the clear lid. Add room-
temperature water (purified or distilled water is recommended) into
the reservoir up to the fill line. Do not exceed the fill line.
2. Add 8–12 drops of your favorite Young Living essential oil into the
water.
3. Replace the clear lid to cover the water reservoir.
4. Plug in the Home Diffuser and push on/off button to start and stop
diffusing.
5. When water runs out, the diffuser will automatically shut off.
notice: Use caution on surfaces that are sensitive to water due to the
mist output of the Home Diffuser.
Cleaning
If essential oil begins to build up on the ultrasonic plate of the Home
Diffuser, gently wipe it off using the included cleaning sponge or a cotton
swab dipped in rubbing alcohol. If essential oil begins to build up on the
clear lid of the Home Diffuser, gently wipe it off using mild soap and water
only. (Do not use aerosol sprays, solvents, or abrasives to clean the plastic
housing.) Clean the ultrasonic plate regularly for best performance.
notice: When removing excess water from the reservoir, pour from
the rear of the diffuser to avoid spilling on the operating buttons or
getting water in the internal air inlets. if water leaks into the air inlets,
it will spill out through the bottom of the diffuser.
4