Telstar TDH030110MD Manual De Instrucciones página 21

COMFORT button
Press to activate the comfort dehumidifying operation.
NOTE: On this operation,the unit can not be set humidity level.
FILTER button
The check filter feature is a reminder to clean the Air Filter for more efficient operation. The Filter
light(Clean filter light) will illuminate after 250 hours of operation. To reset after cleaning the filter, press
the Filter button and the light will go off.
CONTINUE button
Press to activate the continuous dehumidifying operation.
TURBO button
Control the fan speed. Press to select either High or Normal fan speed. Set the fan control to High for
maximum moisture removal. When the humidity has been reduced and quiet ope-ration is preferred,
set the fan control to Normal.
Timer button
Timer
• Press to initiate the Auto start and Auto stop feature, in conjuction with the
• When the unit is on, first press the Timer button, the Timer Off indicator light illuminates. It indicates the Auto
Stop program is initiated. Press it again the Time On indecator light illuminates.It indicates the Auto Start is
initiated. When the unit is off, first press the Timer button,
• The TIMER ON indicator light illuminates. It indicates the Auto Start program is initiated. Press it again the Time
Off indecator light illuminates.It indicates the Auto Stop is initiated.
• Press or hold the UP or DOWN button to change the Auto time by 0.5 hour increments, up to 10 hours, then
at 1 hour increments up to 24 hours.
• The control will count down the time remaining until start. The selected time will register in 5 seconds and the
system will automatically revert back to display the previous humidity setting.
• When the Auto start & Auto stop times are set, within the same program sequence, TIMER ON OFF indicator
lights illuminate identifying both ON and OFF times are now programmed.
21
DEHUMIDIFIER
TDH030110MD
and buttons.