Qlima FSM 40 Instrucciones De Uso página 45

ASSEMBLING THE MIST FAN
The manufacturer is not responsible for any harm or damage if attention is
not paid to the points described above.
The use of this product and the elements required for that purpose is enti-
rely at the end user's own risk.
To assemble the safety grille and blade assembly, remove the spinner (by
turning it clockwise), then the locking nut (by turning it anticlockwise) from
the motor spindle. Place the back safety grille into position. Ensure the safe-
ty grille fits onto the locating lugs. If this is done correctly, the safety gril-
le's carry handle will be at the top. To assemble the safety grille and blade
assembly, remove the spinner (by turning it clockwise), then the locking nut
(by turning it anticlockwise) from the motor spindle. Fix the safety grille into
position by replacing the locking nut tightly by hand.
Do not force the locking nut.
The groove in the centre of the fan blade aligns with a T-bar on the motor
spindle to ensure correct positioning.
Fix the blade into place by gently hand tightening the spinner (Fig.2) anti-
clockwise onto the end of the motor spindle. The spinner is self-tightening;
do not force it.
Lift out all locking clips on the front safety grille (Fig.3)
Locking nut
(Fig.1)
Spinner tightens
anticlockwise
(Fig.2)
(Fig.3)
4
45