Installation Steps - Teradici 292D Guia De Inicio Rapido

INSTALLATION STEPS

1. Connect USB keyboard and mouse.
2. Connect one end of the Ethernet cable to the zero client and
the other end to a switch/router. The switch or router should be
on the same network as the host card or virtual desktop server.
For more advanced network environments, visit the Teradici
Tech support site at techsupport.teradici.com.
3. Connect monitor cables to the zero client.
4. Connect speakers and/or headphones (optional).
5. Connect power supply to the zero client and a power source.
6. Press front panel button to power on the zero client.
ESTABLISHING A PCoIP CONNECTION
Your zero client is pre-configured to connect directly to a PCoIP host card, but
can be configured to use a third party connection broker such as VMware View
to connect to virtual desktops or PCoIP host cards.
Direct connect to host card
1. Power on host PC with PCoIP host card.
2. Power on the zero client and the connected displays.
3. Ensure the zero client is on the same network as the host card.
Wait until the "Connect" dialog appears on screen.
4.
Select "Connect" and you will see the message "Discovering hosts,
5.
please wait...".
6. A list of available hosts is displayed.
Select the host card you wish to connect to and click "OK".
7.
8. The display will show the host PC screen and the zero client's Session LED
on the front panel will turn green indicating a successful PCoIP connection.
Connect to VMware View brokered VDI desktop and/or PCoIP host card
See PCoIP Zero Client & Host Administrator Guide for detailed setup instructions.
Refer to PCoIP Zero Client & Host Administrator Guide for troubleshooting
and additional information, available at techsupport.teradici.com
4