Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Section 19
Install Rear Halo
Step 1
Fabric not Shown
Step 1
Attach The Rear Halo to the Rear Halo Mounting
Bracket using two (2) of the M6 x 15mm screws
(Part # 533.61) per side.
Repeat this step on the left side of the vehicle.
P26 - 56872 Rev. G 0621
Tools
T30
Torx Driver
Installation Instructions - Trektop for Bronco 2 Door
Page 26
Fabric not Shown
Hardware
SCREW, M6 X 1.0 X 15.0
Part #533.61
Qty. 4
© 2021 Bestop, Inc.
Tabla de contenido
