Promate Cyclone Manual Del Usuario página 5

Operation Instructions
1. Charging Cyclone
• Use the provided USB cable to charge Cyclone.
• Connect one end of the USB Cable provided to Cyclone and other end to a USB Power Socket.
• The Red LED will light up indicating that Cyclone is charging normally.
• The Green LED indicator will turn on once fully charged.
• The Red LED indicator will start flashing when the device is running out of power.
2. Turning Cyclone On/Off
• To switch on Cyclone, press and hold the "Power Button".
• The Blue LED's will turn on.
• Press and hold the "Power Button" again to switch off Cyclone.
3. Bluetooth Pairing
• Cyclone automatically enters into Bluetooth pairing mode once powered on.
• To manually enter Bluetooth pairing mode, press and hold the "Multi-Function Button" for about
3 Seconds.
• The Blue LED on the Power Button will begin flashing when in pairing mode.
• Turn on the Bluetooth function on your device and select "Cyclone" in the available devices list.
• Some Bluetooth devices may require you to enter a passcode to pair your device to Cyclone.
Enter "0000" and press submit.
• Once your device is successfully paired, the Blue LED will stop flashing.
4. Playing Music via Auxiliary Connection:
• Connect your device to Cyclone via the 3.5mm Aux cable provided.
• Cyclone will automatically enter into AUX playback mode.
• Control track playback and volume from your connected device.