<<OPERATION MANUAL -- VD8 RETROGRADE SERIES>>
<TIME INDICATION>
VD84
24 hours
day
date
(Retrograde)
small-second
<TIME SETTING>
1. Pull out the crown to
the second click when
the small second hand
is at the 12 O'clock
position.
It will stop on the spot
and advance the hour
and minute hands by
turning the crown.
Set the day by rotating
the hour and minute
hands clockwise.
(Check that 24-hour
hand is set correctly)
*
Do not set the date between 10:00PM and 1:00AM
Otherwise, the day may not change properly. If it is necessary to set the date during that time period, first
change the time to any time outside it, set the date and then reset the correct time.
*
The retrograde day of the week can be set more quickly by following procedures:
(1) Pull out the crown to 2 click position for Day adjustment
(2) Turn the crown clockwise until the Day advance by one increment
(3) Turn the crown counterclockwise until the center hands at or before 12:00 position
(4) Turn the crown clockwise again until the Day advance by one increment
(5) By repeatedly perform the Steps (3) & (4), the Day hand can be adjusted to the desired position more quickly
VD85
day
date
(Retrograde)
small-second
2. Push the crown back
in to the normal
position in signal.
Pull out the crown to
the first click
VD86
day
date
(Retrograde)
small-second
3. Set the date by
4. Push the crown back
rotating the crown in
counter-clockwise
direction (Quick
change function)
VD87
day
date
(Retrograde)
small-second
in to the normal
position.
P. 2
