Tabla de contenido
Idiomas disponibles
Idiomas disponibles
On the remote node
device, register MAC
ID of the original point.
If there is mistake on
MAC ID address, the
link
will
established,
check
carefully
MAC ID and test before
filed deployment.
To
delete
information,
check the radio button
of target node; then
click
on
SELECTED" button.
Return to main page,
the
registered
information appears on
the page.
Select 802.11a, b, or g mode
By default, the AP is set to 802.11g/b mode, running in 2.4GHz
spectrum. If you want to run it in 802.11a mode, you need to change
the settings. The AP cannot run in both 802.11a and 802.11g modes
simultaneously.
1.
Open your web browser and enter the AP's IP address.
2.
Under each interface of any operational mode, select Wireless
Setting on the left side
802.11 a/b/g
Dual Radio Access Point
WLA-9000AP
not
be
please
the
node
please
"DELETE
node
English
9
9
Tabla de contenido
