Ryobi Tek4 RP4000 Manual De Utilización página 8

gB
FR DE ES
IMPORTAnT SAFETY InSTRUCTIOnS
Never aim the beam at a person or object other than the
■
target surface.
This product should not be used without the battery cap
■
installed.
Handle the instrument with care. Treat it as you would
■
any other optical device such as a camera or binoculars.
Avoid exposing the instrument to shock, continuous
■
vibration, or extreme hot or cold temperatures. Damage
to the product and/or serious injury to the user could
result.
Do not use on a ladder or unstable support. Stable
■
footing on a solid surface enables better control of the
product in unexpected situations.
Do not use the product if the switch does not turn it on
■
and off. Any power tool that cannot be controlled with
IT nL PT DK SE FI nO RU PL CZ HU
English
the switch is dangerous and must be repaired.
Use the product in accordance with these instructions
■
and in the manner intended for the product, taking
into account the working conditions and the work
to be performed. Use of the product for operations
different from those intended could result in a hazardous
situation.
Ensure the switch is in the off position before inserting
■
battery pack. Inserting the battery pack into products
that have the switch on invites accidents.
Recharge only with the charger specified by the
■
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
Use battery products only with specifically designated
■
battery packs. Use of any other battery packs may
create a risk of injury and fire.
2
RO LV LT EE HR SI SK gR TR