Existing Construction Assembly Instructions - Homewerks 7141-50 Manual Del Usuario

NEW CONSTRUCTION INSTALLATION INSTRUCTIONS
7. Install a circular 4 in. duct (not included) and secure
it with duct tape or clamps (neither included). Finish
ceiling work. Ceiling hole should be aligned with edge
of fan housing.
8. Attach LED wire connections to the inserts in the fan
housing. Pinch mounting springs on grille and insert
into narrow rectangular slots inside the fan housing.
Push grille up toward ceiling.
Turn on electricity at breaker box after finishing
installation.
EXISTING CONSTRUCTION INSTALLATION INSTRUCTIONS
Review all safety precautions. Make sure electricity
at the breaker box is turned off before beginning
installation. Remove old grille and fan housing.
1. Check to be sure that the existing ceiling opening
measures 7.5 in. x 7.25 in.
2. Attach the duct connector to the fan housing.
7
8
1
2
7
Fan housing
4 in.duct
Duct tape
or clamp
4 hole
Ceiling
2 hole