For Europe - Panasonic FZ-55 Serie Instrucciones De Funcionamiento

Ocultar thumbs Ver también para FZ-55 Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
Regulatory Information

For Europe

For CE marking, refer to the followings:
Declaration of Conformity (DoC)
"Hereby, Panasonic declares that this computer is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU."
Hint:
If you want to get a copy of the original DoC of our above mentioned products, please contact our web address: https://www.ptc.panasonic.eu/
Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Type of wireless
WLAN
Bluetooth
HF-RFID (Contactless Smart Card Reader)
This equipment requires minimum 20 cm spacing from all person's body (excluding extremities of hands, wrist and feet) in directions of the back and both sides of
the LCD display during wireless modes of operation.
<Only for model with external antenna>
When using Port Replicator or Car Mounter on which an external antenna can be installed:
 External antenna for wireless LAN must be professionally installed.
 The gain of external antenna for wireless LAN must not exceed 5dBi.
 The user must maintain minimum of 20 cm spacing between the external antenna and all people (excluding extremities of hands, wrist and feet) during wireless
modes of operation.
For UK
For your safety, please read the following text carefully.
This appliance is supplied with a molded three pin mains plug for your safety and convenience. A 3 ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 3 ampere and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
or the BSI mark
A S A
If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer.
If the fitted molded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safely.
There is a danger of severe electrical shock if the cut off plug is inserted into any 13-ampere socket.
How to replace the fuse
The location of the fuse differs according to the type of AC mains plug (figures A and B).
Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug.
Open the fuse cover with a screwdriver and replace the fuse and close or attach the fuse cover.
Figure A
Figure B
8
Maximum radio - frequency power transmitted in the frequency bands
Frequency band
2412 - 2472 MHz
5150 - 5250 MHz (W52)
5250 - 5350 MHz (W53)
5470 - 5725 MHz (W56)
2402 - 2480 MHz
13.56 MHz
on the body of the fuse.
Fuse cover
Maximum transmit power
20 dBm
23 dBm
23 dBm
23 dBm
20 dBm
42 dBuA/m at 10 m
18-E-1
60-E-1
41-E-1
8-E-1

Hide quick links:

Tabla de contenido
loading

Tabla de contenido