HP OFFICEJET PRO 8600 Manual De Instrucciones

OFFICEJET PRO
www.hp.com/go/customercare
3
3a
3b
Install the HP automatic two-sided printing
accessory (duplexer).
6
Follow the instructions on the printer control panel to finish setting up the
printer, including:
Setting the language and location Setting the language and location
Loading paper Loading paper
While the printer initializes, you might hear some sounds.
Note: Ink from the cartridges is used in the printing process in a number of
different ways, including in the initialization process, which prepares the
printer and cartridges for printing, and in printhead servicing, which keeps
print nozzles clear and ink flowing smoothly. In addition, some residual ink
is left in the cartridge after it is used. For more information see
www.hp.com/go/inkusage.
*CM749-90041*
*CM749-90041*
CM749-90041
8600
Start
3c
English
Español
Deutsch
Français
日本語
Installing the ink cartridges Installing the ink cartridges
Installing the printer software Installing the printer software
1
Remove tape and packing
materials.
Note: Some of the pictures in
this poster might not match your
printer.
4
Install the optional tray 2.
7
EN FR ES PT
2
Press and lift up the control panel
to the desired height.
5
5a
Connect the power cord and turn on the
printer.
Register the printer.
By taking just a few quick minutes to register, you can
enjoy quicker service, more efficient support, and
printer support alerts. If you did not register your
printer while installing the software, you can register
later at http://www.register.hp.com.
© 2011 Hewlett-Packard Development Company, L.P.
www.hp.com
5b
5c
Printed in China
Imprimé en Chine