Saddle Installation - DVO GARNET Guía De Configuración Del Manual Del Propietario

SADDLE INSTALLATION

5
Adjust your saddle to the angle of your preference, then use a 5mm hex to tight-
en each seat clamp bolt, in an alternating fashion, to 15Nm.
SADDLE ALIGNMENT
Align the seatpost to the frame. If necessary, loosen the seat clamp device on
your frame and align your seatpost so that the saddle is in line with the top tube
of your frame.
Re-torque the seat clamp device to the frame manufacturer's specifications or 5-7
Nm, whichever is lower.
ADJUSTING THE RETURN SPEED
Adjusting the air pressure in the seat post
will affect the return speed. A higher pres-
sure will result in a faster return, a lower
pressure will result in a slower return.
Attach a compatible shock pump and
adjust to your desired pressure. Recom-
mended operating pressure is 200 to
250psi (13.7 to 17.2bar).
GARNET DROPPER OWNER'S MANUAL & SET UP GUIDE
ENGLISH
5
250
15