Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Specifications
K20 – K20 DSP+AESOP
Channel Handling
Number of output channels
Number of input channels:
analog
aES3
Number of output channels:
Speaker
Audio
Gain
26 dB
input sensitivity @ 8 Ω
7.37 V
Max input level
27 dB
Gate
-52 dBu
Frequency response ( ±0.5 dB , 1 W @ 8 Ω)
crosstalk (1 kHz)
S/N ratio (20 Hz - 20 kHz a-Weighted @ 8 Ω)
input impedance
THD+N (from 0.1 W to Full power)
DiM (from 0.1 W to Full power)
Slew rate (input filter bypassed @ 8 Ω)
Damping Factor @ 8 Ω, 20 Hz - 200 Hz
DSP
3
aD converters
127 dB-a Dynamic range - 0.005 % THD+N
Da converters
122 dB-a Dynamic range - 0.003 % THD+N
Sample rate converter
140 dB Dynamic range - 0.0001 % THD+N
internal precision
Latency
8 MB (raM) plus 2 MB flash for presets:
Memory/presets
50 stored locally + 150 stored on Smartcard
Delay
4 s (input) + 32 ms (output) for time alignment
raised-cosine, custom Fir, parametric iir:
Equalizer
linear phase (Fir), hybrid (Fir-iir), Butterworth,
crossover
Linkwitz-riley, Bessel: 6 dB/oct to 48 dB/oct (iir)
Limiters
Truepower™, rMS voltage, rMS current, peak limiter
Damping control
Networking
Standards compliance
auto-sensing 10/100 Mbps uTp ports + aESOp
Supported topologies
remote interface
ports
Non aESOp
models
2 port aESOp
2
Front: 2 x rj45 (Ethernet + aESOp connection)
models
4 port aESOp
2
models
rear: 2 x rj45 (Ethernet + aESOp connection)
12 V / 1 a max for DSp management and remote on/off
auxiliary supply
3
via rJ45 or 2 pin phoenix
80 | K Series
2 mono,
bridgeable per ch. pair
2x combo XLr/TrS
1x XLr
1, 2
aESOp via 2x rJ45
2x NL4MD speakON
29 dB
32 dB
5.22 V
3.68 V
24 dB
21 dB
-55 dBu
-58 dBu
-61 dBu
20 Hz - 20 kHz
> 66 dB
> 110 dB
10 kΩ balanced
< 0.5%
(typical < 0.05%)
< 0.5%
(typical < 0.05%)
> 50 V/µs
> 5000
24 Bit Tandem™ @ 96 kHz
24 Bit Tandem™ @ 192 kHz
24 Bit @ 44.1 kHz to 192 kHz
40 bit floating point
6.0 ms fixed latency architecture
peaking, hi/lo-shelving, all-pass,
band-pass, band-stop, hi/lo-pass
active Dampingcontrol™ and
Liveimpedance™ measurement
rS-485 serial connection or
star, daisy-chain, closed loop
2
armonía pro audio Suite™
rear: 1 x rj45 (rS-485 + V Ext)
Front: 2 x rj45 (Ethernet)
McV 1,5/ 2-G-3,81
2
Output Stage
Maximum output power per channel @ 8 Ω
Maximum output power per channel @ 4 Ω
Maximum output power per channel @ 2 Ω
Maximum output power @ 8 Ω Bridged
Maximum output power @ 4 Ω Bridged
2
peak total output, all channels driven
Maximum unclipped output voltage
Maximum output current
The power figure is calculated by driving and loading symmetrically all the
channels: uneven loads allow to achieve highest performance.
35 dB
AC Mains Power
2.62 V
18 dB
power supply
Nominal voltage (±10%)
power factor (> 500 W ouput)
consumption/current draw
idle
1/8 Max Output power
@ 4 Ω
1/4 Max Output power
@ 4 Ω
ac Mains connector
Thermal
Operating temperature
cooling
Thermal dissipation
idle
1/8 Max Output power
@ 4 Ω
1/4 Max Output power
@ 4 Ω
Construction
Dimensions
Weight
2
common to channel 2 XLr analog input, either analog or
1
aES3 depending on system configuration.
available only in kaESOp equiped models.
2
Only for kDSp equiped model
3
universal regulated switch more with pFc
100-240 V @ 50-60Hz
> 0.95
@ 115 V
91 W
1.3 a
88 W
1650 W
15.8 a
1625 W
3250 W
29.3 a
3250 W
aMp cpc 45a connector - 45 a max
(region-specific power cord provided)
0° - 45° c / 32° - 113° F
Fan, continuously variable speed,
temperature controlled, front to rear airflow
682 BTu/h
1590 BTu/h
2498 BTu/h
483 mm x 44.5 mm x 475 mm (19.0 in x 1.8 in x 18.7 in)
12 kg (26.5 lb)
2700 W
5200 W
9000 W
10400 W
18000 W
18000 W
225 V
peak
125 a
peak
@ 230 V
1.17 a
7.9 a
14.7 a
171.9 kcal/h
400.7 kcal/h
629.5 kcal/h
Tabla de contenido
