Important - Emmaljunga City Cross Manual De Instrucciones

Assembly of the adaptor
4
5
OK!
6
OK!
7
8
32
Picture 4, only for the Scooter 2.0 / Scooter S / Scooter 4, Scooter
4S / Viking toddler roller
• To avoid the Toddler Roller moving from sideways when in use,
place the spacers between the Toddler Roller attachment and the
Toddler Roller arm om both sides.
• Place the Toddler Roller against the adaptor bar and ensure that
there will be at least a 1mm gap between the brake axle attach-
ments and the Toddler Roller arm attachment points.
• Depending on the pram model, the brake axle attachments can be
placed either on the inside...
...or on the outside of the Toddler Roller attachment points.

IMPORTANT!

• Depending on the pram model, you may find the Toddler Roller may
lean a little forward or backwards. This is not a cause for complaint
as it is the result of the product being compatible with many diffe-
rent Emmaljunga pram models.
• Attach the adaptor to the brake axle using the M5 bolt and M5 nut
on both sides of the adaptor bar.
IMPORTANT
• Make sure that the adaptor bar is positioned above the brake pedal
and check that the brake pedal is free to operate.
• Use the allen key and the ring spanner to tighten the bolts.
• Tighten the bolts to prevent any sideways movement of the adaptor
bar.
Manual Toddler Roller v. 3.3