25
Before Initial Use
PLEASE NOTE!
•
There may still be some production residues on the device. To avoid harmful effects
to your health, clean the device before you fi rst use it (see the "Cleaning and Care"
chapter).
1. Remove all packaging materials and any possible protective fi lms used for protection
during transportation. Never remove the rating plate and any possible warnings.
2. Wipe the device with a clean, damp cloth. Clean the thermal jug (10), the fi lter holder (17),
its lid (15), the permanent fi lter (16), the measuring spoon (9) and the sieve (11) (see the
"Cleaning and Care" chapter – "Cleaning the Sieve") with a mild detergent and warm water.
3. Set up the device and connect it (see the "Setting Up and Connecting the Device" chapter).
4. Before you enjoy your fi rst coffee, we recommend that you carry out a trial run with coffee
beans to remove any possible production residues in the water system and in the grinder
shaft. To do this, follow the instructions in the "Handling and Operation" and "Preparation"
chapters.
When the device is fi rst used, production-related additives may cause a small amount of
smoke and / or an odour to be produced. This is normal and not a device defect.
5. Repeat this process twice. Do not drink this coffee!
6. Clean the device and accessories (see the "Cleaning and Care" chapter).
Setting Up and Connecting the Device
PLEASE NOTE!
•
Only connect the device to a plug socket that is properly installed and matches the
technical data of the device. The plug socket must also be readily accessible after con-
nection so that the connection to the mains can quickly be isolated.
•
Do not use the device in conjunction with extension cables.
•
Always set up the device with a clear space at the sides (at least 20 cm) and clear space
above it (at least 30 cm) on a fl at, solid and heat-resistant surface that is resistant to
splashing.
05633_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 25
05633_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 25
EN
08.04.2019 15:47:35
08.04.2019 15:47:35