LIMIT 60 Manual página 6

Sleep mode
Frequency Time
Temperature compensation Display shows NTC. Press
Operation
Measuring
Store measurements
Viewing logged readings Press RECALL and toggle with
Cleaning memory
Temp. compensation
Transfer to PC
Battery
Maintenance
Display shows SLP. Press
and 60 minutes.
For manual off, set less time than 5 minutes.
Display shows LINE. Select with
Display shows S-T. Press ENTER for toggle between
minutes:second (m:s) or hour:minutes (h:m). Set correct time
with .
Select a suitable probe depending of measurement a solid surface,
liquid material, gas, or other kind of material.
Turn on the instrument.
Plug in the probe and make correct setup
Start measuring.
Select logging interval.
Press STORE for start logging and press STORE again to stop.
Press ENTER to pause auto logging. Press ENTER again to
continue
For manual store set interval 0:00.
Press ENTER for each manual logging.
Press STORE. The display shows DATA and blinks.
Press STORE for 2 seconds. The display shows CLR.
Press ENTER and all logged readings will be deleted from
memory. It is not possible to delete readings one by one.
Use the offset option in setup to adjust the thermometers reading
to compensate for errors of a specific probe. Place the probe in a
known, stable temperature environment.. See Chance Offset above
Connect the instrument with USB cable to PC.
Setup software in the PC.
Press SEND. The display blinks USB when thermometer and PC
are connected. Press SEND to quite.
Replace battery when battery symbol show up on the display.
Turn off the instrument. Loosen the screw and remove the battery
lid. See fig. Replace with 1 pc 9 V 6F22.
Cleaning the case with soap and water or mild cleaner.
3
English
for sleep mode time between 5
50 Hz or 60Hz.
to select on or off.
.