LIMIT 60 Manual página 5

Manual Thermometer Limit 60
Digital thermometer with two inputs for measuring with two probes at same time.
Up to 99 measurements can be stored over a period of time, by setting automatic logging
interval or manually stored. Stored measurements can be transfer to PC.
The display shows Max-Min-Average and difference between two probes. Hold function.
Easy to compensate for errors of a probe. Display backlight. Switchable between °C and °F
Warning of low battery capacity. Probes of type K, J, T and E can be used.
Specification
Range type K
Reading
Accuracy
Operation temperature
Storage temperature
Dimension
Weight
Battery
Saftey informations
CE. Safety EN55022, EN55024
EN61326 Electrical equipment for measurement, control and laboratory use.
Buttons
HOLD
°C°F K
MAX/MIN
T1 T2 T1-T2
SEND
STORE
RECALL
SETUP
ENTER
SET UP
Logging interval
Probe type
Chance Offset
°C
-200 ... +1370
°C
0,1
°C
0,8 ± 0,5 %
°C
-10 ... +50
°C
-40 ... +60
mm 175x8x30
g 270
1 pc 9 V 6F22
On / Off
On / Off Display backlight
On / Off Display backlight
Select between Celsius Fahrenheit and Kelvin.
Toggle between max, min, and average.
Toggle between T1 and T2 and different between T1 and T2.
Enter USB mode for connection to PC.
Start logging mode. Memory for 99 readings.
Show logged readings.
Start and exit setups
Increase and decrease by setup.
Confirm setup.
Toggle with SETUP button between the different setup options.
Confirm selected setup with ENTER.
Display shows INTERVAL. Select logging interval.
Press with Interval from 0:01 to max 59:59 minutes.
For manual interval set 0:00.
Display shows TYPE. Select type K, J, T or E with
Display shows OFFSET T1. Press with
shows correct reading for T1 . Repeat for T2.
2
English
.
until the display