Replacing The Power Cable - nedis WIFILOFC20FBK Guia De Inicio Rapido

6. Insert wall plugs.
7. Fasten A
7
8. Attach the product to A

Replacing the power cable

You can replace the power cable with a longer or existing
power cable.
Make sure the power cable is disconnected from the power
4
outlet.
1. Open the junction box cover A
2. Disconnect the live, neutral and earth wires.
3. Connect the new live, neutral and earth wires.
4. Close A
.
6
5. Tighten A
4
Installing the Nedis SmartLife app
1. Download the Nedis Smartlife app for Android or iOS on
your phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your e-mail address and tap
Continue.
You will receive a verification code on your e-mail address.
4
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect
with and tap Done.
Connecting the app
1. Make sure Bluetooth is enabled on your smartphone.
2. Open the Nedis Smartlife app on your smartphone.
3. Register or login to your account.
4. Tap + in the top right corner.
5. Insert the power plug into a power outlet.
6. Select the product type you want to add from the list.
The LEDs A
4
If the LEDs are not blinking, switch on the product, and
4
after 10 seconds, switch the product off and on 3 times to
manually enter the pairing mode.
7. Follow the instructions in the app.
PIR sensor control (WIFILOS20FBK only)
After connecting the device with the app, the control page
opens automatically.
1. Tap on Sensor to enter the sensor control menu.
2. Switch the sensor on or off.
to the wall with screws.
7
.
blink to indicate pairing mode is active.
1
by fastening A
6 .
6
5 .