Scope Of Delivery - BGS technic 3382 Manual De Instrucciones

Q: What can I do if the engine cannot be started using the jump starter?
A1: Please check the status of the battery and make sure that the status is min. 50%. 50%
battery capacity is required for jump starting.
Check the seating of the terminals and ensure that the terminals have a sufficient electric
contact to the battery terminals.
The correct way to connect the device is: connect the red terminal to the positive battery
8
terminal, the black terminal to the negative battery terminal and the EC5 connection to
the device. If the starting procedure has failed, please wait a few seconds for the restart.
A2:
Please note that with many ignition keys, starting can only be carried out once. In such a
case, the ignition key must be turned back to the "0" position before making another start
attempt. If the start-up is successful, please immediately remove the jump starter cables
from the jump starter and finally, disconnect the jump starter cables from the vehicle
battery.

SCOPE OF DELIVERY

1x Booster
1x Jump starter terminals
1x USB-charge cable
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
1x Car charger
1x Charger
Input: 110-240V
Output: 15V / 1A
Tel.: 02196 720480
Fax.: 02196 7204820
[email protected]
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed