Tripp-Lite T015-POE El Manual Del Propietario página 8

PoE Test Function
PoE Switch Test
Connect a LAN cable between the PoE switch and the PoE port of
the emitter. Once the connection is made, a fluctuating voltage
value will display on the screen. Press "OK" to starting testing.
The result will display at the screen.
Standard PoE Equipment
If the tested PoE switch is standard, the testing result will display
as the following image.
Pins Providing Power
Non-Standard PoE Equipment
If the tested PoE switch is non-standard, the testing result will
display the following image.
Pins Providing Power
19-10-184-933B7C.indb 8
PSE Type
Polarity
PSE Type
Polarity
8
Modes
Voltage
Modes
Voltage
12/10/2019 2:01:02 PM