MeisterCraft MAS 36B - LIO Traducción De Las Instrucciones De Servicio Originales página 65

5450030-Schrauber-man_a 24.03.11 16:11 Seite 65
h If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
these devices can reduce dust related
hazards.
4 Power tool use and care
a Do not force the power tool. Use the
correct power tool for your
application. The correct power tool will
do the job better and safer at the rate for
which it was designed.
b Do not use the power tool if the
switch does not turn it on and off. Any
power tool that cannot be controlled
with the switch is dangerous and must
be repaired.
c Disconnect the plug from the power
source before making any
adjustments, changing accessories,
or storing power tools. Such
preventive safety measures reduce the
risk of starting the power tool
accidentally.
d Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained
users.
e Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5 Use and treatment of the battery-
operated tool
a Only use chargers to recharge
the battery that have been
recommended by the manufacturer.
When using a charger designated for a
particular type of battery, there is a risk
of fire if it is used with other batteries.
b Only use the batteries designed for
use in the electric tools. The use of
other batteries may lead to injury and
risk of fire.
c When not in use, keep the battery
away from paper clips, coins, keys,
nails, screws or other small metallic
objects that may bridge the contacts.
A short-circuit between the battery
contacts can lead to burns or fire.
d Fluid can escape from the battery
when used incorrectly. Avoid all
contact with this. In the event of
accidental contact, rinse with water. If
liquid should get into the eyes, get
medical assistance. Battery fluid may
result in skin irritations and burns.
65