Beijer Electronics E100 Manual Del Usuario página 140

AJ71C24-R4/A1SJ71UC24-R4/A1SJ71C24-R2/A1SJ71UC24-R2
Station number:
When communicating with the E-series: 0
Mode setting:
When communicating with the E-series: A1SJ71C24-R4/A1SJ71UC24-R4: 5
A1SJ71C24-R2/A1SJ71UC24-R2: 1
Setting of the switches:
Default
comm.
Switch settings in
software to
E-series
SW01 OFF
Only -R4
SW02 ON
Only -R4
SW03 OFF
SW04 ON
SW05 OFF
SW06 ON
SW07 ON
SW08 ON
SW09 OFF
SW10 OFF
SW11 OFF
SW12 ON
Position of Setting
Switch
Setting items
ON
Main drop set- Master
tings station
Computer link/ Compu-
Multidrop ter link
Unused –
Write during Enabled
RUN
Transmission Refer to the table below
speed setting
Data length 8 bits
Parity check Enabled
Parity setting Even
Stop bit 2 bits
Sum check Enabled
Notes
OFF
Local sta- Valid only
tion when SW2 is
OFF
Multidrop Must be ON
link
– –
Disabled For dedi-
cated protocol
–
7 bits –
Disabled –
Odd Valid only
when SW09
is ON
1 bit –
Disabled For dedi-
cated protocol
A-3