Intended Use; Identification Plate - Wolf Garten 72V Li-ION POWER 24B Manual De Instrucciones

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
EN
¾ Adopt a normal posture . Ensure you are
standing securely and that you maintain your
balance at all times . Pay particular attention, if
you are working on a slope. Do not run, rather
walk forwards at a steady pace. This will ensure
that you can maintain better control of the device
if unexpected situations occur.
¾ Take extra care if you are walking backwards .
Risk of tripping!
¾ Switch the motor off when carrying the device
to or from separate working positions .
¾ Never bypass or manipulate safety devices
installed on the device (e .g . by taping the
push-button to the handle) .
After use
¾ Switch the device off, remove the power pack
and check the device for damage .
¾ If you need to clean or service the device,
switch it off and remove the power pack .
¾ Ensure that ventilation slots are free from dirt .
¾ Do not clean the leaf blower using water .
¾ Store the device in a safe, dry location out of
the reach of children .
¾ Do not repair the device yourself; it must be
repaired by a qualified expert or workshop.

Intended use

The leaf blower is intended solely for the blowing
together of leaves and mowed cuttings in private
households.
Any other use is classed as unintended use.
The user is liable for any damages arising from
unintended use.
Incorrect/abnormal use
This leaf blower should not be used in public facili-
ties, parks, sports grounds, roads etc. nor in agricul-
ture or forestry.
14 |
|
Safety instructions
V LI-ION POWER
B
General safety instructions
¾ Never use a device with damaged or missing
guards or covers . They must be repaired or
replaced by a qualified expert or workshop.
¾ Spare parts must meet the requirements of
the manufacturer . Therefore use only original
WOLF-Garten spare parts or spare parts ap-
proved by the manufacturer. During replacement,
always observe the supplied fitting instructions
and first remove the power pack.
¾ Repairs must only be performed by a qualified
expert or workshop .
¾ The device must not be used for purposes
other than those intended because of the risk
of bodily injury to the user or other persons .
¾ Only use the leaf blower in daylight or under
bright artificial light. Keep your work area clean
and well lit.
¾ Only use the leaf blower in dry weather con-
ditions . Keep it away from rain or damp. The
ingress of water into the leaf blower increases the
risk of an electric shock.
¾Do not touch any dangerous moving
parts before the moving parts have come
to a standstill and the power pack has
been removed .
Identification plate
Position
The identification plate is located on the leaf blower
casing.
Note
The label has the status of a certificate. It
must never be altered or obliterated.
Safety instructions
loading