Cycle Selection Charts - Haier HDBC100AFS Manual Del Usuario

CYCLE SELECTION CHARTS

Select the wash cycle and options desired. The dishwasher starts filling once the
door is closed and you press a cycle, unless you select a delay wash. After filling,
and a brief wash period, the machine will pause for a 5 minute energy saving soak
interval. During this time, dried and baked on soil is softened for easier removal later
in the cycle. You can select options as the machine is filling.
•
A " " shows what steps are in each cycle. Temperatures indicate where extra heat is
added. Water usage is shown in U.S. gallons/liters.
This model meets the ENERGY STAR
Cycle time does not include dry time. Cycle time might be longer depending on the
temperature of the water entering the dishwasher.
a b
a
Delay Start/Washing Phases
Indicator Lights: When you delay
start (3, 6, 9 or 12 hours), an
indicator light will be lit to show the
delay time. When the dishwasher
is working, an indicator will be lit to
show the phases of the washing
cycle.
b
Delay Button: Press to delay the
start.
c
Cycle Indicator Lights: To show the
washing cycle.
d
Cycle Button: To select one of six
washing cycles.
Pre-
Wash
14
guidelines for energy efficiency.
®
e
f
g
h
Use for all soil types and dish
loads.
Fill both detergent
compartments.
Second Main Rinse
Pre-
Wash
Wash
127° F (53° C) 154° F (68° C)
c d e
Rinse Aid Light: To show when the
rinse aid dispenser needs to be
refilled.
Power Indicator Light: To show
that there is power going to the
dishwasher.
Power Button: To turn On/Off the
power.
Start/Pause Button: To start the
selected wash cycle, or to pause the
wash cycle after it has been started.
Dry Running Water
Time Usage
(min) (gal/L)
120 3.7
f
h g