HAMPTON BAY PG171H-B Guía De Uso Y Cuidado página 11

Assembly (continued)
9
Assembling the Dome
Assembly
□ Attach the dome assembly to the burner assembly
(C) using wing nuts (KK).
A
B
10
□ Connect the preassembled regulator assembly from
the burner assembly (C) to a 20-lb. LP-gas cylinder
(sold separately). Line up threads on the cylinder
fitting with those on the regulator and rotate
clockwise until tight. HAND TIGHTEN ONLY. DO
KK
NOT USE ANY HAND TOOLS TO MAKE THIS
CONNECTION. Be careful not to cross threads
when screwing in fitting.
□ To disconnect the LP-gas cylinder, first make sure
the cylinder valve is in the "OFF" position. Then,
turn the knob on the regulator assembly
counterclockwise until it is loose
WARNING: Before connecting, be sure there is no
debris caught in the head of the LP-gas cylinder
regulator valve or in the head of the burner and
burner ports.
C
12.2 in.
11
Please contact 855-HD-HAMPTON for further assistance.
Assembling the Cylinder
20 lbs 20 lbs
17.9 in.
12.2 inch
HAMPTONBAY.COM