Magic Remote Functions - LG 55EC930T El Manual Del Propietario

Ocultar thumbs Ver también para 55EC930T:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

34

MAGIC REMOTE FUNCTIONS

MAGIC REMOTE FUNCTIONS
When the message Magic Remote battery is low. Change the battery. is displayed, replace the battery. To install
batteries, open the battery cover, replace batteries (1.5 V AA) matching
compartment, and close the battery cover. Failure to match the correct polarities of the battery may cause the battery
to burst or leak, resulting in fire, personal injury, or ambient pollution. Be sure to point the remote control at the
remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this may damage the remote control.
y
This remote uses infrared light. When in use, it should be pointed in the direction of the TV's remote sensor.
Press the center of the Wheel button to
You can change channels by using the wheel
Returns to the previous screen.
Switches among broadcast (antenna) and
These access special functions in some menus.
(
: Red,
: Green,
: Yellow,
Adjusts the volume level.
Displays the Screen Remote.
* Accesses the Universal Control Menu in some
* Pressing and holding the
display a menu to select an external device that
is connected to the TV.
Used for viewing 3D video.
Scrolls through the saved channels.
Wheel (OK)
select a menu.
button.
(BACK)
(EXIT to LIVE)
various inputs.
Color buttons
: Blue)
VOL
VOL
/INPUT
regions.
button will
(MUTE)
Mutes all sounds.
CH
and
ends to the label inside the
(POWER)
Turns the TV on or off.
(up/down/left/right)
Press the up, down, left or right button to scroll
the menu.
If you press
pointer is in use, the pointer will disappear from
the screen and Magic Remote will operate like
a general remote control.
To display the pointer on the screen again,
shake Magic Remote to the left and right.
(Home)
/INPUT
Accesses the Home menu.
CH
(Voice recognition)
Network connection is required to use the
voice recognition function.
1. Press the voice recognition button.
2. Speak when the voice display window
appears on the left of the TV screen.
* Use the Magic remote no further than 10
cm from your face.
* The voice recognition may fail when you
speak too fast or too slowly.
* The recognition rate may vary depending
upon the user's characteristics (voice,
pronunciation, intonation, and speed) and
the environment (noise and TV volume).
Navigation buttons
buttons while the

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

77ec980t55ec930t-da77ec980t-da55ec9300.awm

Tabla de contenido