Idiomas disponibles
Idiomas disponibles
"Onyx" high-temperature sterilise 70W 230V
How to use
1.
Fit the plug in a power socket.
2.
Open the lid of the boiler (1) and pour in the quartz microspheres pro-
vided. Close the lid.
3.
Press switch (2) to turn the machine on. After 20 minutes it will have
reached a temperature of around 230° and will be re ady for use.
4.
Place the objects to be sterilised inside the boiler (METAL OBJECTS
ONLY) for a max. time of 10-15 seconds.
Carefully remove the sterilised objects as the high temperature could dam-
age them, and then close the boiler lid again so the heat is not dispersed.
Important
For more convenient use, during the course of the workday, always
keep the machine switched on.
Caution:
The machine operates at high temperature. To prevent being burnt, dam-
aging things or injuring persons, always take the following precautions:
•
Never place plastic or paper objects in the boiler or objects made from
deformable or inflammable materials (metal objects only)
•
Do not touch the inner parts of the boiler and the microspheres
•
Handle the lid with care
•
Do not wet the machine with water or other inflammable liquids
•
Do not tilt or turn the machine upside down. If you have to wait for it to
cool down, remove the plug from the power socket and the micro-
spheres from the boiler before performing maintenance.
•
Before doing any jobs inside or outside the machine, disconnect the
plug from the power socket and wait for it to cool down.
For extra protection install a line fault protection switch with nominal
break non higher than 30 mA. Contact an electrician for details.
18/11/2009
PAG 3
