Features
1. 32 high-quality chime tunes
2. 400m operating range in the open air
3. 5-level volume control: 65dB, 75dB, 80dB, 85dB, 90dB
4. Bell push waterproof rating IP65
5. Operation Temperature -10~50 ℃
6. RF penetration range: 4 walls can be penetrated
How to Pair
Note: This device is already paired.
If there is any disconnection or short-range issues, please follow the
instructions below.
Press and hold the receiver's pairing button " " for 3 seconds until the
receiver makes a "Ding-Ding" sound. Then press the kinetic bell push,
then the receiver makes a "Ding" sound meaning pairing between the
kinetic bell push and receiver is successful. The receiver will make
another "Ding-Ding" sound to exit the pairing mode.
Transmitter Installation
Apply the double-sided adhesive tape on the back of the transmitter
case. Remove the outer side of the tape, attach the transmitter to the
location you need and press hard for 30 seconds.
♪
EN
Maintenance
1. In order to protect the precision internal electronic components, it's
advisable that unqualified users should not attempt to open the unit
for maintenance.
2. Do not expose to continuous direct sunlight or humid environment -
this will adversely affect the unit.
3. Correct use of the products helps to effectively extend the service
life of the unit.
IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW
THESE INSTRUCTIONS.
1. SAVE THESE INSTRUCTIONS - This sheet contains important safety
and operating instructions.
2. Before using the product, read all instructions and caution markings
on the product, accessories and device using our product.
3. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
4. Children should be supervised to ensure that they do not play with
the appliance.
5. Keep the product away from fire or explosion may occur.
EN