Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Qty
1
1
1
2
2
4
4
4
1
1
1
1.
Using the two supplied 8-32 x 1-1/4 inch screws, attach the adapter plate to the 4-inch electrical box.
2.
Start to drill the two 1/4-20 x 1/4-inch set screws into the two threaded holes at the top of the mounting bracket
neck.
3.
Assemble the threaded bushing to the light base. Figure 2 illustrates the proper bushing orientation for all
applicable models. Assemble the two set screws to the mounting bracket.
8459108
1" N.P.T.
3/4" N.P.T.
8459109
1/2" N.P.T.
For 1" Base
Model
371LED
4.
Feed the wires, protruding from the base of the light, down through the hole at the top of the mounting bracket.
Insert the light down into the mounting bracket neck and tighten both setscrews securely.
WARNING - Do not make electrical splices within the mounting bracket.
5.
Connect the light wires, now extending out the rear flange of the mounting bracket, to the supply wires in the 4-inch
electrical box (refer to light Instruction Sheet).
6.
Attach the mounting bracket and light assembly to the adapter plate, using the 5/8-inch stainless steel screws (4)
supplied.
Table 1 Kit Contents List
Description
Mounting Bracket, Wall
Backplate
Plate, Adapter
Screw, 8-32 x 1-1/4", Rd. Head
Screw, Set, Hex, Socket, 1/4-20 x 1/4"
Screw, Machine, 1/4-20 x 1-1/4"
Screw, Thd.Frm., Pan Hd. No 14 x 5/8"
Screw, Truss Head, 6-32 x 3/8"
Instruction Sheet
Bushing, Threaded, 1/2" x 3/4"
Bushing, Reducer, 1" x 3/4"
LWMB2
Accessory Kit
Figure 2
3/4" N.P.T.
8459109
1/2" N.P.T.
For 3/4" Base
Model
LSB-120
290B2592
1/2" N.P.T.
8459109
3/4" N.P.T.
For 1/2" Base
Models
AV1ST, AV1-LED, FB2PST,
FB24ST, FB24STHI, FB2LED,
121SLED, 121ALED, 131ST,
131DST, 141ST, and 225
8459A093 Rev. E1 0921
Tabla de contenido
