pico Technology PicoScope 2000 Serie Guia De Inicio Rapido página 6

Quick Start Guide
CAUTION
Applying a voltage to the ground input is likely to cause permanent damage to the
oscilloscope, the attached computer, and other equipment.
CAUTION
To prevent measurement errors caused by poor grounding, always use the high-quality
USB cable supplied with the oscilloscope.
1.2.4 Environment
WARNING
To prevent injury or death, do not use in wet or damp conditions, or near explosive gas or
vapor.
CAUTION
To prevent damage, always use and store your oscilloscope in appropriate environments.
Temperature
Humidity
Altitude
Pollution degree
EMC
1.2.5 Care of the product
The product contains no user-serviceable parts. Repair, servicing, and calibration require
specialized test equipment and must only be performed by Pico Technology or an approved service
provider. There may be a charge for these services unless covered by the Pico five-year warranty.
WARNING
To prevent injury or death, do not use the product if it appears to be damaged in any way,
and stop use immediately if you are concerned by any abnormal operations.
WARNING
When cleaning the oscilloscope, use a soft cloth and a solution of mild soap or detergent
in water. To prevent electric shock, do not allow water to enter the casing, as this will
compromise the electronics or insulation inside.
CAUTION
Do not tamper with or disassemble the oscilloscope, connectors or accessories. Internal
damage will affect performance.
DO231-8 Copyright © 2006–2017 Pico Technology Ltd. All rights reserved.
Storage
–20 °C to +60 °C
5% to 95% RH
(non-condensing)
EN61326:2013 basic immunity. The radiated and conducted RF signals
prescribed by this standard may cause interference of up to 4 vertical
divisions peak to peak.
PicoScope 2000 Series Oscilloscopes and MSOs
Operating
0 °C to 50 °C
5% to 80% RH
(non-condensing)
2000 m (maximum)
2 (maximum)
Quoted accuracy
See Specifications
3