Cleaning And Maintenance; Troubleshooting - cecotec TOTAL IRON 10100 PRO Manual De Instrucciones

ENGLISH
Storage
1. Fold the ironing board and hanger bracket to the storage position.
2. Store the cord in its corresponding compartment.
3. Store the iron and garment steamer in their corresponding compartment.
4. Move the appliance by pulling it along by the board handle.
Tip: After a long ironing session, it is advised to keep the ironing board folded out to let it dry
before you store it.

6. CLEANING AND MAINTENANCE

• Turn off, unplug the appliance from the power supply, empty the water tank and
allow it to cool down completely after each use.
• If there is any fabric adhered to the soleplate, use a damp cloth with vinegar to wipe
off the soleplate.
• Do not use abrasive scouring pads, powders or cleaners to clean the product.

7. TROUBLESHOOTING

Question
Why does the iron or
garment steamer remain
cold?
TOTAL I RO N 1 01 0 0 PRO
30
Answer
The iron or garment steamer is not switched on. Press the
iron or garment steamer power-on button.
The Autocleaning process may be in progress. Wait for the
process to finish and then switch on the appliance again.
The automatic shut-off function may have been activated.
The appliance is switched off automatically when the steam
generator has not been used for 15 minutes. Press power-on
switch once to restart the appliance. It is ready for use when
the light on the iron or garment steamer turns blue.